E-mail
EM1000 BASIC-Programmable Ethernet Module

Serial RS232 to WIFI Converter (BASIC Programmable)

The EM1206EV board + GA1000 WIFI module makes a sophisticated programmable serial/RS232 to WIFI 802.11b/g converter.

( Tibbo )
Call for Pricing

Ask a question about this product

The EM1206EV board + GA1000 WIFI module makes a sophisticated programmable serial/RS232 to WIFI 802.11b/g converter.

The EM1206EV board features the following components:
?
•??? The EM1206 and RJ203 modules (assembled together and soldered into the EM1206EV board).
•??? Connector for a wireless add-on module, such as the GA1000 Wi-Fi device (Included).
•??? Power jack and a switching power regulator.
•??? Multi-channel RS232 port with three RS232 outputs and four RS232 inputs.
•??? Expansion connector with GND, 3.3V (Vcc), 12V (Vin), and 8 TTL I/O lines.
•??? Eight yellow LEDs to indicate the status of I/O lines (see RS232 port and Expansion Connector topic).
•??? Four jumpers to select between RS232 port and expansion connector (see RS232 port and Expansion Connector topic).
•??? Two buttons: setup (connected to the MD line of the EM1206), and reset (connected to the RST line).
•??? Green and red status LEDs (connected to SG and SR lines of the EM1206).
•??? Buzzer (connected to the CO line of the EM1206).
•??? Supercapacitor (backup power source) for the RTC of the EM1206.
•??? Antenna and antenna cable included in the package.







Last Updated: Saturday, 23 September 2017 10:57


   Home arrow Products arrow Controllers and Sensors arrow Serial RS232 to WIFI Converter (BASIC Programmable)
Copyright © 2008 PT. RFID INDONESIA.